6030.png
+
  • 6030.png

JD6030 Ashless Air Compressor Oil Additive Package

Categories:

Industrial Oil


Compressor is a kind of machine used to compress gas and increase pressure or transmission of gas; due to different air displacement, pressure and compression media, it can be divided into two categories according to structure of the compressor: positive displacement type and speed type. 
Get A Quote

Product Introduction

Compressor is a kind of machine used to compress gas and increase pressure or transmission of gas; due to different air displacement, pressure and compression media, it can be divided into two categories according to structure of the compressor: positive displacement type and speed type. Therefore, there are different requirements on compressor oil, our JD6030 compressor oil compound does not contain metal salt additive which is ashless-type, and the liquid condition allows for very convenient use; it also applies to preparation of rotary compressor. Refined oil product has excellent oxidation resistance, small carbon deposition tendency, good anti-rust properties, water separation performance and good anti-wear effect. 

Recommended Dosage

Usually, compressor oil with viscosity grade of N32, N46, N68 etc. can be prepared by adding 1.3- 1.5% dosage, and the oil quality meets the requirements of GB5940-86 standard indicators.

Performance levelAdditive Dosage  m%
L-DAA, L-DAB, L-DAC1.2%- 1.3%
L-DAG,L-DAH,L-DAJ1.3%- 1.5%

 

Technical Specification

ItemTypical dataQuality indexTest method
AppearanceBrown colorless liquidBrown colorless liquidVisual
Kinematic viscosity 100°C   mm2/sreport6.68GB/T 265
Flash point (opening)        °C    ≥ 150160GB/T 3536
Density 20°C               g/cm30.95- 1. 101.008GB/T 1884
Nitrogen content             %≥ 1.61.80SH/T 0224

 

Package/Product Storage/Transportation

Net weight: 200kg/drum.

Prevent from strong oxidant. Follow SH/T0164 during packing mark, transportation, storage and acceptance of delivery. The maximum temperature should not exceed 60 °C for the storage, handling and oil preparation, the maximum temperature should not exceed 45°C during long-term storage. This product is not flammable, non explosive and non corrosive. No special preventative measure is required during use, but general preventive measures in handling of chemicals shall be followed. If the oil splashes onto skin, detergent, soap and water can be used to wash it away thoroughly.

Key words:

Online Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%

Online Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%