Additive Component

Visit the official website →

JDMD-DMTD 2,5-Dimercapto-1,3,4-thiadiazole

JDMD-DMTD is an important chemical intermediate. Its derivatives are widely used in medicine, lubricating grease, metalworking fluid, rubber industry, etc.

JDMD-5826 2,5-Bis(octyldisulfanyl)-1,3,4-thiadiazole

JDMD-5826 is a liquid ashless metal deactivator with extreme pressure and oxidation resistance effects. It is widely used in various automotive and industrial lubricating oils and metalworking fluids. At very low concentration, it can effectively prevent the corrosion of active sulfur on copper and copper alloys.

JDMD-561 2,5-Bis(tert-dodecyldisulfanyl)-1,3,4-thiadiazole

JDMD-561 is a liquid ashless metal deactivator with extreme pressure and oxidation resistance effects. It is widely used in various automotive and industrial lubricating oils and metalworking fluids. At very low concentration, it can effectively prevent the corrosion of active sulfur on copper and copper alloys.

JDMD-551 Metal Deactivator Benzotriazole Derivative

JDMD-551 is equivalent to REOMENT-38 produced by CIBAGEIGY Company in Switzerland. It can form an inert protective film on the metal surface or form chelate compounds with metal ions, thus inhibiting the catalytic effect of metal or its ions on oil oxidation, and has a prominent effect of mixing with antioxidant.

JDMD-5484 2,5-Bis(tert-nonylsulfanyl)-1,3,4-thiadiazole

JDMD-5484 is a liquid ashless metal deactivator with extreme pressure and oxidation resistance effects. It is widely used in various automotive and industrial lubricating oils and metalworking fluids. At very low concentration, it can effectively prevent the corrosion of active sulfur on copper and copper alloys.

JDMD-539 TTA derivative (Oil-soluble)

JDMD-539 is amethyl benzotriazole derivative, is a liquid oil soluble corrosion inhibitor and metal passivator, which is widely used in various lubricating oils and metal working fluids.

JDFM-855 Friction Modifier

JDFM-855 belongs to the Organomolybdenum complex(S/P free). As an oil soluble liquid organic molybdenum friction modifier, it can significantly reduce the friction coefficient of crankcase oil and engine oil.

JDFM-600A Molybdenum di-butyldithio-carbamate for Grease

JDFM-600A is a solid organic molybdenum EP/AW additive, which can ensure excellent anti-oxidation and anti-wear properties of lubricating grease under high temperature and long service life conditions.

JDFM-525 Friction Modifier

As a liquid organic molybdenum friction modifier containing sulfur and phosphorus, JDFM-300L 300L can greatly reduce the friction coefficient of oil products, and has multiple functions such as extreme pressure, anti-wear and anti-oxidation.

JDFM-3000 Friction Modifier

As a phosphate-free long-chain molybdenum dialkyl dithiocarbamate friction modifier, JDFM-3000 can greatly reduce the friction coefficient of oil products, and has many functions such as anti-wear and anti-oxygen. Its unique alkyl structure makes it have better solubility in base oils, and is widely used in internal combustion engine oils, various industrial lubricants, pure oil-type metal working fluids, greases and so on.

JDFM-300L Friction Modifier

As a liquid organic molybdenum friction modifier containing sulfur and phosphorus, JDFM-300L 300L can greatly reduce the friction coefficient of oil products, and has multiple functions such as extreme pressure, anti-wear and anti-oxidation.

JDPPD8248 Polymethacrylate (PMA) Pour Point Reducer

JDPPD8248 is an efficient pour point depressant of polyalkyl methacrylate(PAMA) in Paraffinic and intermediate base oils, especially in hydrorefined base oils, it also have good low temperatu- re performance and can improve the viscosity index.

JDPPD8158 Polymethacrylate (PMA) Pour Point Reducer

JDDDP8158 is polymethacrylate type pour point depressant, which is produced with high grade fatty alcohol with advanced technology production.

JDVII-6831 Polymethacrylate (PMA) VII

JDVII-6831 is a solution of polymethacrylate in a highly refined mineral oil. It is a viscosity index improver specially designed for hydraulic fluids with high shear stability. It is suitable for the modulation of hydraulic oil, especially low-temperature hydraulic oil, and can effectively improvesthe viscosity indexof the oil. 

JDVII-6831E Polymethacrylate (PMA) VII

JDVII-6831E is the solution of polymethacrylate in deeply refined mineral oil, which can effectively improve the viscosity index of oil, save the amount of pour point depressor, and the price is reasonable.

JDVII6738 Polymethacrylate (PMA) VII

JDVII6738 is a solution of poly(methyl methacrylate) in deeply refined mineral oil. It is a high shear stability viscosity index improver specially designed for blending in transmission oil production.

JDVII-665 Polyhydrogenstyrene Isoprene VII

 JDVII-665 is a viscosity index modification agent of polyhydrogenstyrene isoprene type. This product has good low temperature fluidity, ideal high temperature and high shear performance, and good perception of the reducing agent.

JDVII-661 is a viscosity-index improver of polyhydrogenated styrene isoprene. This product has good permanent shear stability, excellent low temperature flow performance, ideal high temperature and high shear performance, and good sensitivity to point dep

JDVII-663 is a polyhydrostyrene isoprene type of viscosity index improvement agent. This product has a very good permanent shear stability, excellent low temperature fluidity, ideal high temperature and high shear performance, and a good feeling of the reducing agent.
< 1234 >

Online Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%