Normal Paraffin C14–C17: The Base Stock Logic Behind Metalworking and Rust-Preventive Oils
Classification: Industry News
Oct 21,2026

Clear cutting fluid at the point of cut: where the base stock earns its keep
Why does one rust-preventive oil precipitate after six months in the drum, while another metalworking fluid reeks in the workshop? In most cases the additive package is not the culprit — the n-paraffin content and distillation range of the base stock are.
The short answer
Normal paraffin C14–C17 (heavy liquid paraffin) is the classic base stock for metalworking oils, specialty rust-preventive oils, electrical discharge machining (EDM) oils and metal cleaners. Judge a lot on four indicators: distillation range width, n-paraffin content, aromatics content, and colour plus flash point.
1. Why C14–C17
Published industry material divides liquid paraffin into light cuts (C9–C13) and heavy cuts (around C14–C16). C14–C17 is used primarily as a dewaxing solvent, EDM / wire-cutting fluid, base oil for specialty rust preventives, metalworking base oil, metal cleaner and lamp-grade liquid paraffin.
The carbon number is a deliberate balance:
- Too low → fast evaporation, low flash point: worse safety and worse consumption.
- Too high → precipitation at low temperature, rising viscosity: penetration and cleaning suffer.
- C14–C17 sits at the balance point between volatility and lubricity, which is why public technical sources describe it as a "medium-cut liquid paraffin balancing volatility and lubricity".
2. The specification grid to confirm before you buy
| Item | What to check |
| CAS number | 64771-72-8 |
| Appearance | Colourless transparent oily liquid, no fluorescence in daylight |
| Solubility | Insoluble in water, glycerol, cold ethanol; soluble in benzene, ether, chloroform, carbon disulfide, hot ethanol |
| Flash point | Determines transport mode: public sources note that closed-cup flash point below 60 °C requires dangerous-goods vehicles |
| Aromatics content | Drives odour, stability and health & safety — the lower the better |
3. How the downstream applications divide
- EDM fluids — need narrow distillation range and low aromatics for machining accuracy and low mist.
- Specialty rust-preventive base oils — need low sulphur and low aromatics, good film formation and water displacement.
- Metalworking base oils (cutting / grinding / stamping) — need suitable viscosity and load-carrying capacity, usually compounded with EP agents and rust inhibitors.
- Metal cleaners — exploit its oil-dissolving power together with surfactants.
- Dewaxing solvent / chlorinated paraffin feedstock — feeds an entirely separate value chain.
4. What we supply
Normal paraffin / liquid paraffin grades sit inside our synthetic base oil and raw material product line, available in different distillation ranges and refining depths.
👉 Tell us your end use (rust prevention / machining / cleaning) and your target market's transport requirements. We will match the distillation range and packaging plan.
Contact us
Talk to the ICASON peroxide team
Tel: +86 16639328358 Whatsapp: +86 16639328358 Wechat: 166393238358 E-mail: icason001@icason.com
Related Blog