DCP vs BIPB vs DTBP: How to Select the Right EVA Crosslinking Peroxide

Nov 02,2026

DCP, BIPB and DTBP are the three organic peroxides most used to crosslink EVA, and choosing among them is a trade-off between cost, odor and crosslinking efficiency. DCP is the low-cost workhorse but decomposes into acetophenone, leaving a persistent smell. BIPB (the same molecule is often written BIBP) is essentially odorless and roughly 30–40% more efficient, at 15–20 times the price. DTBP delivers the best scorch stability but the lowest efficiency and is seldom used in EVA. This guide compares the three on the numbers that matter and closes with a five-step selection tree.

Basic Profiles of the Three Crosslinkers

  • DCP (dicumyl peroxide): molecular weight 270.37; white crystalline powder or flakes; 1-minute half-life ≈ 175 °C; 10-hour half-life ≈ 117 °C.
  • BIPB (α,α′-bis(tert-butylperoxy)diisopropylbenzene): often called "odorless DCP"; molecular weight 338.49; white crystalline powder; 1-minute half-life ≈ 175–180 °C; 10-hour half-life ≈ 118 °C.
  • DTBP (di-tert-butyl peroxide): molecular weight 146.23; colorless transparent liquid; 1-minute half-life ≈ 186 °C; 10-hour half-life ≈ 126 °C.

         We manufacture all three on our own lines.

How Do DCP, BIPB and DTBP Compare?

Parameter

DCP

BIPB

DTBP

1-min half-life temperature

175 °C

175–180 °C

186 °C

10-h half-life temperature

117 °C

118 °C

126 °C

Active oxygen content

5.92%

9.45%

10.96%

Odor

Pungent

Almost none

Slight

Decomposition residues

Acetophenone (odorous)

tert-Butanol, acetone (odorless)

Acetone (volatile)

Crosslinking efficiency

★★★

★★★★

★★

Equivalent dosage

100% baseline

60–70% of DCP

Higher than DCP

Physical form

Solid powder

Solid powder

Liquid

                                                                  Verify half-life and active-oxygen values against the current datasheet/SDS of the specific grade.

Why Do They Perform So Differently?

DCP: the acetophenone problem

DCP carries two isopropylphenyl groups. On thermal decomposition the peroxide bond cleaves to a cumyloxy radical, which breaks down further into a methyl radical and acetophenone — the compound behind the characteristic smell in EVA foam. It is intrinsic to the molecule and cannot be fully removed by process changes alone.

BIPB: tert-butyl groups, no odor

BIPB carries two tert-butylperoxy groups and decomposes into tert-butoxy radicals and acetone, both essentially odorless. Its larger molecular weight gives the highest active-oxygen content of the three at 9.45% (versus 5.92% for DCP), which is why it reaches the same crosslink density at only 60–70% of the DCP dosage — roughly 30–40% higher efficiency. The trade-off is price, around 15–20× DCP.

DTBP: simple structure, high temperature

DTBP has the simplest structure — two tert-butyl groups — and the highest 1-minute half-life temperature at 186 °C. That stability means clean, low-odor decomposition (mainly acetone) but a slow reaction at typical EVA lamination temperatures of 140–150 °C, and the lowest practical efficiency. It is mainly used in silicone rubber and high-temperature specialty elastomers; 

Which Crosslinker Fits Your Application?

  • Photovoltaic (PV) encapsulant film — BIPB. Module encapsulation is effectively zero-tolerance for odor; BIPB is nearly odorless and, at 60–70% of the DCP dose, efficient.
  • EVA foam (footwear, packaging) — DCP, or a DCP/BIPB blend. Cost-sensitive foam is DCP's strongest market; for premium footwear a 7:3 DCP/BIPB blend cuts odor at only 2–3× the cost.
  • EVA hot-melt adhesives — BIPB or DCP. Higher crosslink density improves bond strength; BIPB reaches higher density, while DCP works where budget is tight.
  • Cable compounds — DCP. Processing at 160–180 °C suits DCP well, and cost matters. DTBP is technically usable but too inefficient to recommend.

A 5-Step Decision Tree

  1. Budget? Tight → DCP. Flexible → step 2.
  2. Odor requirement? Strict (PV, food contact, medical) → BIPB. None → step 3.
  3. Processing temperature? Below 160 °C → DCP or BIPB (DTBP is too slow). Above 180 °C → all three are viable.
  4. Crosslink density target? High (hot melts, premium foam) → BIPB. Standard → DCP.
  5. Blend or neat? To balance cost and performance, blend DCP/BIPB at 7:3 or 6:4; for zero-odor specs, use neat BIPB.

How JOHO Supplies These Peroxides

At JOHO (Changzhou Jiuhao Chemical), we produce DCP, BIPB/BIBP and DTBP in our own plant, which lets us control particle size, active-oxygen consistency and batch traceability from synthesis to packing. our plant covers roughly 18,000 m² and we export to 40+ countries.

Every lot ships with a COA covering active oxygen, moisture and ash.  Our lab can run gel-content checks (e.g. ASTM D2765, verify against the current standard) on your EVA compound.

FAQ

Q1. Is BIPB the same as BIBP?

Yes. Both names refer to bis(tert-butylperoxyisopropyl)benzene, CAS 25155-25-3 / 2212-81-9. "BIPB" and "BIBP" are spelling variants used interchangeably in the industry.

Q2. Can I blend DCP and BIPB, and in what ratio?

Yes. A 7:3 DCP/BIPB blend is the common starting point, reducing odor noticeably while adding only about 2–3× the peroxide cost versus neat DCP. For strict zero-odor requirements, use neat BIPB.

Q3. Why is DTBP not used in PV film?

Its 1-minute half-life temperature is 186 °C, while PV lamination runs at 140–150 °C, so decomposition is too slow. Its practical efficiency is only 60–70% of DCP, and as a liquid it disperses less evenly in EVA pellets.

Q4. How much less BIPB do I need than DCP?

Typically 60–70% of the DCP dosage for the same crosslink density, because BIPB carries 9.45% active oxygen versus DCP's 5.92%.

Q5. What causes the DCP smell, and can it be removed?

The odor comes from acetophenone, a decomposition product fixed by DCP's molecular structure. It can be reduced with a DCP/BIPB blend or post-baking at 80 °C for 2–3 hours, but not fully eliminated.

Source Peroxides Direct From Our Own Plant

DCP, BIPB and BPO produced in-house, with per-batch active-oxygen testing and DCS-controlled lines. Factory-direct pricing, full COA. 

JOHOCHEMICAL — the organic peroxides business unit of ICASON Group

Website: www.JOHOCHEMICAL.com · Phone / WhatsApp / WeChat: +86 16639328358

Online Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%