Odorless BIBP (Perkadox 14 Equivalent) Crosslinking Agent: Vulcanization Best Practices & Sourcing Selection Guide for Manufacturers

Nov 10,2026

BIBP — bis(tert-butylperoxyisopropyl)benzene — is a high-performance, low-odor organic peroxide crosslinker supplied as an equivalent to Perkadox 14 and Luperox F40, used wherever the acetophenone smell of DCP is unacceptable. It is registered under two CAS numbers and carries 9.45% active oxygen, with a half-life of 10 h at 121 °C, 1 h at 142 °C and 0.1 h at 165 °C. This guide covers CAS interpretation, a BIBP-versus-DCP comparison, and phr-level recipes by rubber type. As a manufacturer, JOHO supplies BIBP-40 and BIBP-40B directly from our own plant — see the [BIBP-40 and BIBP-40B product datasheets](https://www.icasongroup.com/product_detail/102.html).

What Is BIBP, and Which CAS Number Applies?

The same molecule appears in the market under two CAS registrations, and buyers often ask which one to specify:

  • CAS 25155-25-3 — the meta/para isomer mixture; this is the industry-standard CAS for general-purpose BIBP.
  • CAS 2212-81-9 — 1,4-bis(tert-butylperoxyisopropyl)benzene, the para single isomer.

Other identifiers: chemical name bis(tert-butylperoxyisopropyl)benzene; molecular formula C₂₀H₃₄O₄; molecular weight 338.48 g/mol; active oxygen 9.45% in the pure grade. "BIPB" is a common spelling variant of BIBP — the two refer to the same compound. When you request a quote, state the CAS and the active-oxygen grade (e.g. 40% masterbatch) so we can match the right [datasheet](https://www.icasongroup.com/product_detail/102.html).

BIBP vs DCP: Full Performance Comparison

Dimension

BIBP (Perkadox 14 / Luperox F40 equiv.)

DCP

Odor & bloom

Very low odor, no bloom risk; volatiles evaporate fast

Pungent bitter-almond (acetophenone) odor; prone to bloom

Active oxygen

9.45%

5.92%

Equivalent loading

60–70% of DCP (lowers formulation cost)

100% baseline

Scorch safety

Higher half-life temperature → better scorch safety in mixing/extrusion

Minor decomposition at low temperature → scorch risk

Heat / compression set

Very high crosslink density; excellent hot compression set

Standard

Half-life (10 h)

121 °C

117 °C

The practical reading: BIBP buys you odor compliance and scorch margin at a lower dosage, while DCP remains the economic default where odor is not a specification.

Half-Life and the Processing Window

BIBP's half-life of 10 h at 121 °C, 1 h at 142 °C and 0.1 h at 165 °C sits above DCP's. In practice this widens the safe mixing and extrusion window: the peroxide is less likely to decompose prematurely during processing, yet still cures efficiently at typical vulcanization temperatures. Confirm the numbers against the current SDS of the specific grade before setting your cure schedule. Our [crosslinker storage and handling guide] covers the thermal limits in more detail.

Recommended Dosage by Rubber Type

  • EPDM door seals and radiator hoses: BIBP-40B at 2.0–3.5 phr, with TAIC co-agent at 1.0 phr (https://www.icasongroup.com/product_detail/45.html). This combination delivers low odor and high crosslink density for automotive weathering parts.
  • HNBR oil- and heat-resistant parts: BIBP-40 at 4.0–6.0 phr, with service temperatures up to 165 °C.
  • EVA / POE foamed midsoles: BIBP gives lower odor and durable rebound in premium footwear foam.

These starting recipes should be confirmed with your own rheometer data; dosage depends on VA or ACN content, filler loading and target gel content.

Sourcing BIBP from JOHO's Own Factory

We synthesize and concentrate BIBP in-house, so we control active-oxygen assay, particle-size distribution and batch traceability from reactor to packed masterbatch. According to public sources, our plant covers roughly 18,000 m² and we export to 40+ countries.

Each shipment includes a COA with active oxygen, moisture and ash. A 25 kg trial lot is the usual first step — contact us via [request samples and a current export quote](/contact), and compare cure trace and odor against your incumbent grade.

FAQ

Q1. Is BIBP the same as BIPB or Perkadox 14?

BIBP and BIPB are spelling variants of the same molecule (CAS 25155-25-3 / 2212-81-9). "Perkadox 14 equivalent" means a grade with the same active ingredient and performance, supplied under JOHO's own designation.

Q2. What is the difference between CAS 25155-25-3 and 2212-81-9?

25155-25-3 is the commercial meta/para isomer mixture and is the standard CAS for general BIBP; 2212-81-9 is the para-pure 1,4-isomer. Confirm which one your specification requires.

Q3. What dosage should I use for EPDM door seals?

A typical starting point is 2.0–3.5 phr BIBP-40B plus 1.0 phr TAIC. Optimize with rheometer data for your specific compound.

Q4. Why does BIBP need a lower dosage than DCP?

Because it contains 9.45% active oxygen versus 5.92% in DCP — roughly 60% more — so only 60–70% of the DCP loading is needed for the same crosslink density.

Q5. Is JOHO's BIBP REACH registered?

Confirm with our regulatory team, who can supply the current compliance documents with your quote.

Buy BIBP From the Plant, Not a Trading Desk

Odorless crosslinkers from our own production line — consistent active oxygen, batch COA and technical support on dosage.

JOHOCHEMICAL — the organic peroxides business unit of ICASON Group

Website: www.JOHOCHEMICAL.com · Phone / WhatsApp / WeChat: +86 16639328358

Online Message

* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible

%{tishi_zhanwei}%