Categories
ICASON2088L
Categories：
Matting Agent
Email:icason@icason.com
ICASON2088L
Brief Introduction：
ICASON2088L is a newly developed low-temperature curing matting agent suitable for epoxy/polyester. The coating has excellent leveling, mechanical and anti-yellowing properties.
Specification：
Appearance | White or light yellow powder | Visual |
Global softening point (℃) | 128-134 | GB617-88 |
Volatile matter[%] | ≤0.5 | GB1725-89 |
Technical Characteristic:
1. Select the 50/50 type polyester resin with higher activity.
2. It meets the requirements of a wide range of baking conditions. The coating has good leveling and excellent mechanical properties, and can achieve low-temperature curing at approximately 160℃ for 20 minutes or 170℃ for 15 minutes.
3. Excellent over-baking gloss stability, suitable for applications that require good anti-yellowing properties.
4. The minimum gloss can reach around 5 degrees.
Refererce Formula:
Ingredients (by weight) | 50/50 type | 60/40 type |
Epoxy resin | 300 | 240 |
Polyester resin [50:50] | 300 | / |
Polyester resin [60:40] | / | 360 |
ICASON2088L | 40 | 40 |
Leveling agent | 10 | 10 |
Titanium dioxide | 200 | 200 |
Barium Sulphate | 140 | 140 |
Benzoin | 10 | 10 |
Total | 1000 | 1000 |
Extrusion conditions | Zone I 90℃, Zone II 100℃ | |
Curing condition | 160℃ for 20 minutes | |
Appearance | Good | Good |
Impact-resistant[positive, negative] （50Kg·cm） | Pass | Pass |
Usage and Dosage:
1. Mixed with all the raw materials and then extrude.
2. The dosage is 1-4.5%of the total weight of the formula, depending on the desired gloss.
Packaging and Storage:
1.Packed in polyethylene lined kraft paper bags; each bag weighs 25 kilograms.
2.Store in a cool and dry place to avoid moisture absorption. After use, it should be sealed immediately and kept away from fire sources.
3. Based on our experience with this product, in the <32℃ storage temperature is valid for at least three years.
Key words:
Previous:
Next:
Related Products
Online Message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible
Block C, Rongyu City Square, 200 meters north of the intersection of Zhongyuan Road and Pushang Road, Puyang City, Henan Province, China