Thermoplastic Elastomers
Dowren New Material (Henan) Co.,Ltd is a wholly-owned subsidiary of lcason HoldingGroup, Our products inculding Thermoplastic vulcanizates(TPV); Thermoplastic elastomer(TPEs);Thermoplastic polyester elastomer(TPEE) and Thermoplastic polyurethanes (TPU)of four series with hundreds of grades.
Fluorescing whitening agents OB-1
CAS NO:1533-45-5
Features:Brilliant bluish whitening effects; excellent heat resistance; high chemical stability; good compatibility in a wide range of resin.
Antioxidant 1035 is a sulfur containing primary antioxidant and heat stabilizer that is widely used for the process stabilization of polyethylene wire and cable resin application.
This product is mainly used as a slip agent anti-sticking agent for plastics such as CPP, BOPP, LDPE, LLDPE, EVA, PVC, PVDF, PVDC, PU metallocene polyethylene
This product is mainly used as a slip agent anti-sticking agent for plastics such as CPP, BOPP, LDPE, LLDPE, EVA, PVC, PVDF, PVDC, PU metallocene polyethylene
Mono-and diglycerides is a kind of widely used grease chemical products, It is a widely used and high dosage emulsifier in food and daily chemical industry.
CAS NO. :99-94-5
Auxiliary PVC heat stabilizer BS - CUS is a new non-toxic material made by certain conditions of synthesis.
Auxiliary PVC heat stabilizer BS - CUS
Auxiliary PVC heat stabilizer BS - CUS is a new non-toxic material made by certain conditions of synthesis.
The product is environment-friendly plasticizer not containing phthalates. It conforms with environmental standards of European Union, USA and other developed countries.
The product is environment-friendly plasticizer not containing phthalates. It conforms with environmental standards of European Union, USA and other developed countries.
STEAROYL BENZOYL METHANE SBM-55
The product is light yellow or white powder. It is easily soluble in diethyl ether, trichloromethane, dimethylbenzene, toluene, and sodium hydroxide solution, slightly soluble in ethyl alcohol, and very slightly soluble in water.
STEAROYL BENZOYL METHANE SBM-50
The product is light white powder. It is easily soluble in diethyl ether, trichloromethane, dimethylbenzene, toluene, and sodium hydroxide solution, slightly soluble in ethyl alcohol, and very slightly soluble in water. At present, β-diketone product is the unique PVC material that is suitable for foods and drugs.
As additive, it is widely used heat stabilizer of halogenate polymer.
As additive, it is widely used heat stabilizer of halogenate polymer.
It is our brand new product in 2011. It is a special poly-oil ester, an auxiliary heat stabilizer to PVC heat stabilizer based on Ca-Zn /Ba-Zn.
200KGS closed steel drum or 25KGS plastic drum
Light white color,buff crystalline powder. Dissolve in organic solvents like chloroform ,Ether, dimethylbenzene, methylbenzene, sodium hydroxide solution etc. and little in Ethanol, water.
Chlorinated Polyethylene (CPE 135A) is a kind of white granular elastomer,which is made from polyethylene and chlorine gas after substitution reaction under the condition of catalysis. It has good performances of flame retardancy.
ACR 401 is a kind of white flowing powder type PVC processing aid based on emulsion polymerization process. It can be used in rigid PVC formulations to improve melt flowing, PVC plasticization ability and surface quality. It has bben widely used in the moulding of various PVC products.
Thermoplastic vulcanizate (TPV), which consists of a polyolefin phase (PP) with a dynamically cured EPDM phase, is closely dispersed in the PP matrix which gives rubber-like properties and has the advantage of thermoplastic processing techniques.
Thermoplastic polyurethane (TPU) is a block copolymer consisting of alternating sequences of hard and soft segments. Its adaptability is due to the presence of both these hard and soft segments in its chemical structure. The proportion of hard and soft segments can be manipulated to produce a wide range of hardness.
TPEE (thermoplastic polyester elastomer) is a block copolymer containing polyester hard segment and polyether soft segment.
Thermoplastic elastomers (TPE), sometimes referred to as thermoplastic rubbers, are a class ofcopolymers or a physical mix of polymers (usually a plastic and a rubber) that consist of materials withboth thermoplastic and elastomeric properties.
Block C, Rongwei City Plaza, Intersection of Zhongyuan Road and Pu Shang Road, Puyang City, Henan Province, China
