DTBP is a liquid dialkyl peroxide. It is an efficient initiator for polymerization of olefins and acrylic resins, and a modification agent of PP degradation.
ICASON-DTAP is clear liquid, used as initiator of polymerization acrylates and methacrylates, ethylene.
It is mainly used as crosslinking agent for synthetic rubber, EVA injection shoe,etc.
The curing temperature over 90 degrees Celsius, the amount of 1.2-2.5% (depending on different types of plastic and products required)
DBPH 45% paste is transparent yellowish paste,mainly used for the crosslinking of silicone rubbers.
As Cross linking Agent, the temperature over 90 degrees Celsius, the amount of 1.2-2.5% (depending on different types of elastomers required).
Cumene hydroperoxide is a colorless to light yellow liquid with a sharp, irritating odor. Flash point 79.44℃. Boils at 153°C and at 100°C at the reduced pressure of 8 mm Hg.
Polymerization of styrene
It mainly used in whitening of wheat or corn powder.
BPO75% is a free flowing granular(or powder) form of water damped diacyl peroxide, used as initiator of polymerization in styrene, acrylic resins; and curing agent for unsaturated resin and elastomers.
BPO 50% powder is a fine, free-flowing, non-caking granular powder consisting of 50% dibenzoyl peroxide, pathalate ester plasticizer and standardized with silica, which can be easily and fast dispersed and dissolved in unsaturated polyester and acrylic resins.
BPO 50% paste is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form, which can be easily dissolved in resins and monomers.
BIPB is a white to yellowish granule,Insoluble in water, partly dissolving in ethanol, ether, benzene, carbon tetrachloride and other organic solvents.
BIPB 40% is a widely used crosslinking agent for plastics and rubbers, such as CPE, EPDM, EVA, silicone rubber, NBR and fluorubber.
Dicumyl peroxide is white crystalline.Melting point of 41 - 42 ℃. Relative density of 1.082.Decomposition temperature 120 - 125 ℃ room temperature stable.
Packed in 20kg PE jerrycan with a safety relief cover;
Specialty Additives & Synthetic Base Stocks
Thermoplastic vulcanizate (TPV), which consists of a polyolefin phase (PP) with a dynamically cured EPDM phase, is closely dispersed in the PP matrix which gives rubber-like properties and has the advantage of thermoplastic processing techniques.
Thermoplastic polyurethane (TPU) is a block copolymer consisting of alternating sequences of hard and soft segments. Its adaptability is due to the presence of both these hard and soft segments in its chemical structure. The proportion of hard and soft segments can be manipulated to produce a wide range of hardness.
TPEE (thermoplastic polyester elastomer) is a block copolymer containing polyester hard segment and polyether soft segment.
Thermoplastic elastomers (TPE), sometimes referred to as thermoplastic rubbers, are a class ofcopolymers or a physical mix of polymers (usually a plastic and a rubber) that consist of materials withboth thermoplastic and elastomeric properties.
Thermoplastic polyurethane (TPU) is a block copolymer consisting of alternating sequences of hard and soft segments.
TPEE (thermoplastic polyester elastomer) is a block copolymer containing polyester hard segment and polyether soft segment.
Thermoplastic elastomers (TPE), sometimes referred to as thermoplastic rubbers, are a class ofcopolymers or a physical mix of polymers (usually a plastic and a rubber) that consist of materials withboth thermoplastic and elastomeric properties.
Block C, Rongwei City Plaza, Intersection of Zhongyuan Road and Pu Shang Road, Puyang City, Henan Province, China
